Related Manuals for NookBox SD-29
Summary of Contents for NookBox SD-29
- Page 1 NookBox Installation Guide NB Smoke Multi detektor SD-29 Installation Guide NB Smoke Multi detektor SD-29 (P119602 / E6310096)
- Page 2 NB Smoke Multi detektor SD-29 (P119602 / E6310096) SD-29 Series is a wireless smoke detector with built-in PIR motion sensor and heat detection capability. Designed to protect your family against potential fire hazards, the Smoke detector is also capable of detecting movements and reporting temperature to users.
-
Page 3: Parts Identification
Press and hold the button for 10 seconds to enter calibration process. White LED (Emergency Light) • The emergency light will begin to flash slowly to alert uses that the system is alarming. (SD-29-HME only) • The LED light will turn in for 60 seconds upon any movement detection. -
Page 4: Getting Started
NookBox Installation Guide NB Smoke Multi detektor SD-29 Features Battery • Three CR123 3V Lithium batteries are used to supply power to the Smoke Detector. • The Smoke Detector has a foolproof mechanism which prohibits cover closure without first installing battery. -
Page 5: Alarm Activation
NookBox Installation Guide NB Smoke Multi detektor SD-29 Temperature Detection (SD-29-H/SD-29-HM/SD-29-HME only) • The Temperature Sensor measures temperature every 10 seconds, and transmits temperature reading to the Control Panel every 30~33 minutes. • Users can also press the Test Button once to transmit current temperature reading manually. -
Page 6: Alarm Silence
NookBox Installation Guide NB Smoke Multi detektor SD-29 Alarm Silence • When the Smoke Detector is alarming, pressing the Test button will put the Smoke Detector into Alarm Silence mode to silence the alarm for 9 minutes. The buzzer will only stop sounding after the alarm has been activated for at least 1-minute. -
Page 7: Installation Recommendation
NookBox Installation Guide NB Smoke Multi detektor SD-29 Installation Installation Guideline • It is recommended that the installation site be in the center area of the ceiling. • Do not locate the detector in the following locations: » The Kitchen – Smoke from cooking might cause an unwanted alarm. -
Page 8: Mounting The Smoke Detector
• The Smoke Detector is designed to be mounted on the ceiling. The ideal mounting height for the Smoke Detector is 2.7 meters to 3 meters. Mounting above 3 meters can affect detection performace. (SD-29-HM/SD-29-HME only) • The Smoke Detector provides detection coverage of a 360° circle with 5 meters in diameter. - Page 9 NookBox Installation Guide NB Smoke Multi detektor SD-29 For more information visit: www.getnookbox.com...