Related Manuals for NookBox P119037
Summary of Contents for NookBox P119037
- Page 1 NookBox Installation Guide Smoke Mini Detector Installation Guide NookBox Smoke Detector Zigbee (P119037 / E6309676)
- Page 2 NookBox Smoke Detector Zigbee (P119037 / E6309676) NookBox Smoke Detector is a ZigBee Smoke Detector with built-in PIR and Temperature sensor, it is capable of sending wireless signals to the coordinator in the ZigBee network upon detection of smo- ke particles or abnormal high heat to protect house from fire hazards. The Smoke Detector’s alarm situations, battery condition, operating conditions, supervisory data and general fault information are sent to the ZigBee Control Panel wirelessly.
-
Page 3: Parts Identification
NookBox Installation Guide Smoke Mini Detector Parts Identification 1. LED Indicator / Test Button Red LED • Turns ON briefly: Transmitting signal. • Quick flash: Alarming. • Flashes every 2 seconds: Smoke Detector under warmup and calibration process. • Flashes every 1 second: Smoke Detector under Sleep Mode. -
Page 4: Test Mode
NookBox Installation Guide Smoke Mini Detector Features Battery • A 3V CR123A Lithium Battery is used to supply power to the Smoke Detector. • The Smoke Detector has a foolproof mechanism which prohibits cover closure without first installing battery. •... -
Page 5: Alarm Detection
NookBox Installation Guide Smoke Mini Detector Alarm Detection The Smoke Detector will activate fire alarm when either of its smoke detection or high heat detection function is triggered. When an alarm is activated, the Smoke Detector will transmit alarm signal and raise alarm with its built in buzzer, the Red LED will flash rapidly. The alarm sound will repeat in pattern of 3-second alarm and 1-second pause. - Page 6 NookBox Installation Guide Smoke Mini Detector ZigBee Network Setup ZigBee Device Guideline ZigBee is a wireless communication protocol that is reliable and has low power consumption and high transmission efficiency. Based on the IEEE802.15.4 standard, ZigBee allows a large amount of devices to be included in a network and coordinated for data exchange and signal transmission.
-
Page 7: Installation Recommendation
NookBox Installation Guide Smoke Mini Detector Installation Installation Guideline • It is recommended that the installation site be in the center area of the ceiling. • Do not locate the detector in the following locations: » The Kitchen – Smoke from cooking might cause an unwanted alarm. -
Page 8: Mounting The Smoke Detector
NookBox Installation Guide Smoke Mini Detector Mounting the Smoke Detector Step 1. Place the Smoke Detector at desired mounting location and use the Range Test function to make sure the Smoked Detector can be received by the Control Panel at mounting location. -
Page 9: Maintenance
NookBox Installation Guide Smoke Mini Detector Maintenance The top cover and the smoke detecting chamber can be detached from the Smoke Detector for maintenance. Follow the steps below to maintain the smoke detecting chamber: Step 1. Remove the top cover by gently pressing the latches by using your fingers. - Page 10 NookBox Installation Guide Smoke Mini Detector Appendix (For developers only) Temperature Sensor Cluster ID Device ID: IAS Zone 0x402 //SD Endpoint: 0x01 Device ID: IAS Zone 0x402 //IR Endpoint: 0x02 Device ID: Temperature Sensor 0x0302 //TS Endpoint: 0x03 Server Side...
- Page 11 NookBox Installation Guide Smoke Mini Detector Attribute of Temperature Measurement Cluster Information Identifier Name Type Range Access Default Mandatory / Optional Measured 0x0000 MeasuredValue Signed 16-bit Integer Value to Max Read only 0x00 Measure Value 0x954d – 0x0001 MinMeasuredValue Signed 16-bit Integer...
- Page 12 NookBox Installation Guide Smoke Mini Detector For more information visit: www.getnookbox.com...