Advertisement
ASA Camera System (8000 Series AS)
3 Monitor Version II - Display Operation
3.1
Controls
1.
switch. Pressing it once will turn display ON,
pressing it again will turn display OFF.
2. Camera - this button will switch the camera
channels being displayed in the following
order: CH1, CH2, CH3, CH4, Split 2way, Split
3way, Splt 4 way.
3. Dim - selects between Day and Night mode.
4. Menu - this button performs three functions:
a. Enters main Menu.
b. Selects highlighted function/option while in
Menu Mode.
c. Enters Auto Scan when pressed and held
for 3 seconds. Word "Scanning..." will be
displayed and then channels will be rotated
on the screen.
5. Down - button perform two functions:
a. Decreases brightness, contrast, colour, tint,
speaker volume.
b. Will allow navigation through available
menu settings while in Menu Mode.
6. Up - button perform two functions:
a. Increases brightness, contrast, colour, tint,
speaker volume.
b. Will allow navigation through available
menu settings while in Menu Mode.
1
2
3
4
Figure 14 - Monitor Version II - Display Controls
Operator's Manual
5
6
9
Advertisement
