Advertisement
Operator's Manual
ASA Camera System (8000 Series AS)
2.2
Camera Adjustments
Cameras are factory installed. Each in-tank camera
is set such that the level indicator panel and the
metering auger sump are within the camera's
viewing area, refer to
Figure
12. This allows for
product level monitoring and to easily see when
the tank is completely empty.
Level Indicator
If adjustment of the in-tank cameras is required
Panel
they are magnetically mounted to the tank walls
and can be rotated on the magnet. Tilt adjustment
can be done by loosening the allen screw on the
camera mount.
Refer to
Figure
13. The rear view camera is to
from behind the unit. Note that the camera view
can be "mirrored" in the controller settings so that
when looking ahead at the display.
The rear view camera can be moved left/right
Metering Auger
via the magnet mount. It can also be tilted by
Sump
loosening the allen screws on the mount.
LevelDecal_IMG_1512.jpg
Figure 12 - In-Tank Camera View
Rear
Camera
Figure 13 - Rear View Camera Location
8
Advertisement
