Advertisement
Advertisement
Table of Contents
Related Manuals for Whadda WPSH338
Summary of Contents for Whadda WPSH338
- Page 1 USER MANUAL HM-10 wireless shield for Arduino® Uno WPSH338 whadda.com...
- Page 2 If in doubt, contact your local waste disposal authorities. Thank you for choosing Whadda! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
- Page 3 Surf to www.arduino.cc for more information. Product Overview The WPSH338 uses an HM-10 module with Texas Instruments ® CC2541 Bluetooth v4.0 BLE chip, fully compatible with WPB100 UNO. This shield has extended all the digital and analogue pins out into 3PIN, making it easy to connect to sensors using 3PIN wire.
- Page 4 Description D2-D13 RX (D0) TX (D1) Bluetooth ® Bluetooth ® communication pin settings, default D0 D1; another RX TX pin to set the serial port, RX to D3, TX to D2 A0-A5 Bluetooth on-off switch ® reset button...
- Page 5 Example In this example, we use one WPSH338 mounted on the WPB100 (UNO) and a recent Android Smartphone to communicate with. Please be aware that BLE (Bluetooth Low Energy) is NOT backward compatible with the ® older “Classic” Bluetooth . For more information, please see ®...
- Page 6 ® should now see the WPSH338 under the name HMSoft. Connect to it. Type “a” and send it to the WPSH338. The WPSH338 will answer with “Velleman WPSH338 […]“. At the same time, the LED connected to D13 on the WPB100 (UNO) will switch on for a few seconds.
- Page 7 Modifications and typographical errors reserved - © Velleman Group nv. WPSH338_v01 Velleman Group nv, Legen Heirweg 33 - 9890 Gavere...
Need help?
Do you have a question about the WPSH338 and is the answer not in the manual?
Questions and answers