Page 1
Model: HDA-931 INTRODUCTION The OREI HDA-931 is a video and audio separated converter with three sets of HDMI outputs, one for TV 4K@60/HDR video and audio signals, one for eARC Soundbar, one for Amplifier HDMI audio, and S/PDIF(Optical) and analog 3.5mm stereo interface outputs.
Page 2
FEATURES Video and audio separation Auto eARC Detection when using the TV's app or external devices Supports dual HDMI audio interface (HDMI_eARC and HDMI_Audio) Supports 4K@60 HDR Compatible Dolby Atmos (via HDMI) Supports Pixel clock rate up to 600 MHz ...
Page 3
I/O INTERFACE [Front] [Back] Connect external source Audio select Indication LED The Audio select light position is Audio Format select key displayed. (2CH / 5.1CH / 7.1CH) *Audio Format select Connect power adaptor (2CH > 5.1CH > 7.1CH) with (microUSB) Default:...
Page 6
Step 4. Set the audio format select AUDIO SELECT to 2CH or 5.1CH or 7.1CH (by audio system). Step 5. Connect the DC 5V/1A power adaptor to the micro USB DC 5V of HDA-931. Step 6. After you finish the connection, one of the audio format indication LED (green) will be lighted on.
(2) Make sure your audio cable is connected and non-destructive. (3) Make sure the HDA-931 audio select position that matches the sound device. (4) Please refer your sound bar’s set up instruction Q4: If you hear unusual audio noise from headphone or speaker that connect to 3.5mm output?
Page 8
However you can run the apps from external HDMI sources. (1) When you are watching Dolby Atmos content over a streaming app from external HDMI source devices, when connect to HDA-931 you can still have Dolby Atmos capable soundbar / AVR to get the Dolby Atmos sound.
Page 9
Q7: How to change audio settings on PlayStation 5 console and pass-through Dolby Atmos to eARC soundbar ? PLAY STATION 5: (1) Settings → Sound → Audio Output → HDMI Device Type >>> change to Sound Bar (2) Settings → Sound → Audio Output → Audio Format (Priority) >>> change to Dolby, if your speaker is connected directly to PS5) ...
Page 10
(1) HDA-931: HDMI_eARC Audio support uncompressed 7.1CH. (2) HDA-931: HDMI_Audio support compressed 7.1CH Please switch Audio format to 5.1 or 7.1CH on HDA-931 NOTICE Manufacturer reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.