Table of Contents
Advertisement
ACCESSORIES
PLATFORM SET
Pull the Side Platform a little bit out of the
two integrated holders by holding them.
Swivel down the Side Platform.
Fasten all black knobs by turning them clockwise
Now you should have a gap between Platform
and holders as shown in the picture.
Push back the Side Platform into all holders,
and the two integrated holders into the dolly.
48
ACCESSORIES
PLATFORM SET
Attention
!
If you want to use only the left or right Side Platform you additionally need
the holders on the front for stability. By using the Side Platform without the
holders it may bend / damage your platform.
49
Even in low mode you are completely free
with your wheels. You don't have to worry
about crashing the platforms while you are
moving the dolly.
Advertisement
Table of Contents
