Panther S-TYPE 3 Series User Manual page 24

ACCESSORIES
PLATFORM SET
Now you can take the Side Platform to mount
it the same way you did with the Middle
Platform.
If necessary you can now take the filling plate
to build one flat surface.
High / Low Mode
To switch now from high to low mode of the
platforms the first thing you have to do is to
turn the wheels from the standard gauge to
narrow gauge by turning the Steering Rod
180° (please read topic „Steering - Narrow
Gauge" to learn more about this step).
Make sure to fasten the black knobs on the
Side Platform as well.
46
ACCESSORIES
PLATFORM SET
Open the Side Platform and pull it out
a little bit by turning the black knobs
counterclockwise.
Open the two holders and turn it around 180°.
Push in the Middle Platform and fasten the
black knobs.
Open the Middle Platform the same way and
pull it completely out.
Fasten the black knobs on both sides.
Open the black knobs on the outside of the
Side Platform.
47