Advertisement
3
3-F | Using Belt Positioning Clip
1. Make Sure Vehicle's Seat Shoulder Belt Lays
Between The Neck And Edge Of Shoulder As
Shown
If the vehicle's seat shoulder belt lays outside this
zone, you MUST use the belt positioning clip.
DO NOT use the belt positioning clip if the shoulder
belt is already in the red zone.
2. Attach Belt Positioning Clip
The shoulder belt positioning clip MUST be attached
to the slot on the back of the base. Insert the loop
end of strap through the slot on back of seat exactly
where shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop end as
shown and pull strap up.
30
Advertisement
