Advertisement
2
Operating
1
CONNECTING
Connect the satellite speakers to the output RCA on the
back panel of the Sub-woofer. Please note to match the color,
red to red and white to white.
2
Connect the subwoofer to the Audio device.
Using Audio connecting cord , connect the Line-input port
of the subwoofer to Line-out of the Audio Device (Such as the
computer, Discman, etc).
3 Playing the audio device
Plug the AC power plug into the wall outlet and turn on the
power switch, Now your speaker system is ready for Use.
Adjusting the volume control and Bass control , then you can
enjoy the music.
SPECIFICATIONS
Total Power Output :
Input Impedance:
Input Sensitive:
Bass Unit:
M
id-range Unit:
Tweeter Unit:
Dimension(Subwoofer):
Dimension(Satellite):
Gross Weight:
Edifier assumes no responsibility for any errors that may appear
in this manual. Information contained herein is subject to change
without notice.
RMS 6W x 2 + 12W(THD=10%)
10K Ohm
450 mV
7" Aluminum coil, 4 Ohm
3" Paper coil, 4 Ohm
1"
PV membrane dome
241(W) x 229(H) x 279(D)mm
91(W) x 183(H) x141(D)mm
About 6.9 Kg
Notice
Operating
Advertisement
