Getting Started; Location Of Controls On The Main Unit - Iluv I1277 Instruction Manual

GETTING STARTED

Location of Controls on the Main Unit

DVD OPEN
3 4 6
5
1. iPod DOCK
2. POWER BUTTON
3. OPEN / CLOSE BUTTON
4. PREV BUTTON
5. PLAY / PAUSE BUTTON
6. NEXT BUTTON
3 | iLuv
1
10
2
8 9
7
7. STOP BUTTON
8. iPod BUTTON
9. DVD BUTTON
10. DISC TRAY
11. REMOTE SENSOR
12. LED SCREEN
GETTING STARTED
Location of Controls on the Main Unit-continued
11 12
1. COMPOSITE VIDEO OUTPUT
2. S-VIDEO OUTPUT
3. 5.1-CH AUDIO OUTPUT
(FL, FR, SL, SR, CEN, SW)
DISC ERROR
This DVD player has built-in error compensation circuits to correct minor defects in a disc. There are limits,
however, to the amount of correction available. In some cases, the DVD player may skip some tracks, or parts
of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) on the disc
being played which are too large for the error compensation circuits to handle. If you encounter this problem,
try a new disc before having this unit serviced. If the DVD player operates normally, the skipping problem is
probably due to a defective disc.
Note: Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be played
depending on the condition of the disc.
i1277 | V10M10_IM_EN_01223008
1 2 3 4 5
4. COMPONENT VIDEO OUTPUT
(Y, Pb, Pr)
5. DIGITAL AUDIO COAXIAL OUTPUT
6. MAIN POWER SWITCH
6
iLuv | 4