Air Relax ARM SLEEVE Quick Start Manual

AIR RELAX
Please Read This Quick Guide. Thank You.
1. The control unit should be placed on a stable flat surface from where it will not slip or fall.
Position the control unit so that the user can easily reach it during sessions.
2. Plug the power cord into an appropriate electrical wall outlet.
3. Insert the arm into the arm sleeve, so the zipper stays on the top of your arm.
4. Pull the sleeve over your shoulder leaving a
5. Wrap the fastening strap around the torso, under the free arm.
6. Fasten the strap at the torso and adjust the length by pulling on the buckle for a comfortable fit.
7. Connect the hose plug to the air socket on the control unit making sure the
8. Press the ON/OFF button on the control unit to turn on the system.
9. Press the MODE button on the control unit to select the mode.
10. Press the PRESSURE button on the control unit to adjust the pressure level.
11. When the session is completed, the control unit will turn off automatically.
12. Allow the arm sleeve to deflate for 30 seconds before you remove it.
Note:
The hoses should not be twisted or folded.
If other buttons are pressed during a current session, another 15 minutes starts from the time the last
button is pressed.
air relax
ARM SLEEVE
1-2-inch space between your neck and the sleeve.
air relax
arrow sign
air relax
is facing up.
air relax