Summary of Contents for TDE Instruments Digalox DPM72
Page 1
Digalox ® DPM72 XBEE interface Instruction manual (Rev-2022-08) 1. Description The Digalox ® DPM72 devices with XBEE interface can communicate with other DPM72 devices via XBEE radio technology (2.4 GHz mesh network). In this way, measured values from remote devices can be integrated into a display as remote values.
Page 2
4. Configuration To configure a device, plug the XBEE stick into the computer. The driver of the stick is installed automatically if the computer is connected to the Internet. If the XBEE connection settings of the device should be reset, short-circuit connector J8 and open it again.
Page 3
6. Status LEDs There are three LEDs on the back of the device that indicate the device status. Description Status Power (green) shines Device on Assoc (orange) shines Device not connected Assoc (orange) flashes Device connected Act (rot) shines Device sends data 7.
Need help?
Do you have a question about the Digalox DPM72 and is the answer not in the manual?
Questions and answers