Advertisement
device and go to 3.1 Bluetooth Mode setting.
9.7 The scanner connects to the terminal device, how
to connect with another terminal device?
Pull the dongle out of A
Connect A in 2.4G mode
Close A's Bluetooth
connect A in Bluetooth mode
9.8 Will it reconnects automatically after turning it off?
2.4G mode: When Dongle connects to the terminal device and
the scanner has not established a new connection with other terminal
devices, the scanner will connect automatically after re-power on.
Bluetooth mode: The terminal device establishes a connection
through Bluetooth Mode before the scanner turns off. After shutting
down, there is no deletion on the Bluetooth list of the terminal
device, the scanner will connect automatically after re-power on.
If the connection is not successful, go to 3.1 or 3.2.
9.9 Why Red light does not shine when charging?
Please confirm the power supply device turns on, let the
scanner power off and charge again.
10. Technical supporting
If this manual doesn't solve your problem, please contact your
supplier.
Scan required barcode
Plug dongle into B or
open B's Bluetooth
connect B
Advertisement
