Download Print this page

Maxell USL-901A User Manual

Optional lens

Advertisement

Quick Links

English
Optional Lens User's Manual
Important Safety Instructions
(Always follow these instructions)
Please read this section on important safety instructions before replacing the projector lens.
To prevent accidents during lens replacement and ensure product safety after replacing the
lens, be sure to follow the safety instructions described herein.
● These symbols indicate actions that can result in injury or damage if these operations are
not followed correctly.
Warning
Caution
● These symbols indicate the types of precautions that must followed.
This symbol indicates that
caution must be taken.
This symbol warns of possible
electrical shock.
Warning
■ Make sure to follow the procedure on lens installation and removal
for your safety.
■ Please read this manual and manuals for the
projector to ensure correct usage through understanding.
Incorrect usage could result in fire, an injury or damage.
■ Do not subject the device any shock or impact.
Any shock or impact could result in an injury or damage. The lens projects
out of the device. Take care not to strike it.
This symbol indicates that there is a possibility of serious injury
or even death if the operation is not followed correctly
This symbol indicates that there is a possibility of physical
injury or damage to equipment if the operation is not followed
correctly.
This symbol warns of possible
high heat.
This symbol indicates an action
that must not be performed.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the USL-901A and is the answer not in the manual?

Questions and answers

Summary of Contents for Maxell USL-901A

  • Page 1 English Optional Lens User’s Manual Important Safety Instructions (Always follow these instructions) Please read this section on important safety instructions before replacing the projector lens. To prevent accidents during lens replacement and ensure product safety after replacing the lens, be sure to follow the safety instructions described herein. ●...
  • Page 2 Notice ■ Take care of the lens. • When transporting the lens, protect the lens by attaching the lens cap. • Do not touch the lens to prevent fog or dirt on the lens that could cause deterioration of display quality. •...
  • Page 3 About IEC 62471-5 As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015. RISK GROUP 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eyes. GROUPE DE RISQUE 2 ATTENTION Rayonnements optiques potentiellement dangereux émis par ce produit.
  • Page 4 Important Operation Instructions Warning ■ Do not place the lens in a location subject to direct sunlight or other strong lighting or near heat-radiating equipment. This can cause a fire due to the properties of the lens. It can also cause injury or damage to the lens.
  • Page 5: Contents Of Package

    The following accessories are included with each lens. Lens Model Supplied accessories Lens caps (front and rear) Ultra short throw zoom lens USL-901A Optional Lens User's Manual Lens caps (front and rear) Short throw zoom lens SL-902 Optional Lens User's Manual...
  • Page 6: Installing And Removing The Lens

    1. Remove the front cover Note • There may be compatible models other than those listed in this manual. For the latest information, check our website below. http://biz.maxell.com/en/display_equipment/ Maxell, Ltd. 5030 Totsuka-cho, Totsuka-ku, Yokohama-shi, Kanagawa 244-0003 Japan http://biz.maxell.com/ja/display_equipment/ マクセル株式会社 〒 244-0003 神奈川県横浜市戸塚区戸塚町 5030 番地...
  • Page 7 Lens Installation Procedure (continued) 2. Install the lens (1) Remove the lens cap. Then turn the lens groove upward and install the lens into the projector. Lens cap (rear) Lens cap (front) groove...
  • Page 8 Lens Installation Procedure (continued) Caution ■ Installing the lens in the projector with the lens cap on may lead to malfunction. ■ Avoid hitting the surface of the lens on the projector when attaching the lens as this may lead to malfunction. ■...
  • Page 9 Lens Installation Procedure (continued) Warning ■ To prevent the lens from falling off, after attaching the lens, check that it is securely mounted and that the lens does not move. If the projector falls or topples over, it could result in injury or damage to the projector and the surrounding things.
  • Page 10 Lens Removal Procedure 1. Return the lens shift to the center position (1) Press the LENS SHIFT button. The LENS SHIFT dialog will appear. (2) Select CENTERING on OSD and press the ENTER or ▲ button. Or, press LENS CENTERING button on the control panel. The message is displayed to confirm whether to execute the CENTERING feature to move the lens to the center.
  • Page 11 Lens Removal Procedure (continued) 4. Remove the lens Support the lens, and lower the lens lock lever to the lowest position and remove the lens from the projector. You can move the lever while the upper plate touches lower one. Lens lock lever Caution ■...
  • Page 12 Lens Removal Procedure (continued) 5. Attaching the mount cap and the front cover. Insert the mount cap and the front cover into the projector body. mount cap Front cover Note Insert the mount cap to prevent any substance getting into the lens installation •...
  • Page 13 Adjustment of Ultra short throw zoom lens (USL-901A) The focus balance from the center to surrounding area varies on the screen size. The Ultra short throw zoom lens has a focus adjustment function to adjust this balance. How to use Focus Adjustment 1.

This manual is also suitable for:

Sl-902Sd-903Ml-904Ll-905Ul-906