Download Print this page
Maxell USL-701 User Manual

Maxell USL-701 User Manual

Optional lens

Advertisement

Quick Links

English
Optional Lens User's Manual
Important Safety Instructions
(Always follow these instructions)
Please read this section on important safety instructions before replacing the projector lens.
To prevent accidents during lens replacement and ensure product safety after replacing the
lens, be sure to follow the safety instructions described herein.
● These symbols indicate actions that can result in injury or damage if these operations are
not followed correctly.
Warning
Caution
● These symbols indicate the types of precautions that must followed.
This symbol indicates that
caution must be taken.
This symbol warns of possible
electrical shock.
This symbol indicates an action
that must not be performed.
Warning
■ Make sure to follow the procedure on lens installation and removal
for your safety.
■ Please read this manual and manuals for the
projector to ensure correct usage through understanding.
Incorrect usage could result in fire, an injury or damage.
■ Do not subject the device any shock or impact.
Any shock or impact could result in an injury or damage. The lens projects
out of the device. Take care not to strike it.
This symbol indicates that there is a possibility of serious injury
or even death if the operation is not followed correctly
This symbol indicates that there is a possibility of physical
injury or damage to equipment if the operation is not followed
correctly.
This symbol warns of possible
high heat.
Do not look into the lens.
Do not block the projection light.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the USL-701 and is the answer not in the manual?

Questions and answers

Summary of Contents for Maxell USL-701

  • Page 1 English Optional Lens User’s Manual Important Safety Instructions (Always follow these instructions) Please read this section on important safety instructions before replacing the projector lens. To prevent accidents during lens replacement and ensure product safety after replacing the lens, be sure to follow the safety instructions described herein. ●...
  • Page 2 Notice ■ Take care of the lens. • When transporting the lens, protect the lens by attaching the lens cap. • Do not touch the lens to prevent fog or dirt on the lens that could cause deterioration of display quality. •...
  • Page 3 Important Operation Instructions Warning ■ Do not place the lens in a location subject to direct sunlight or other strong lighting or near heat-radiating equipment. This can cause a fire due to the properties of the lens. It can also cause injury or damage to the lens.
  • Page 4: Contents Of Package

    The following accessories are included with each lens. Lens Model Supplied accessories Lens caps (front and rear) Ultra short throw zoom lens USL-701 Optional Lens User's Manual Lens caps (front and rear) Fixed short throw lens FL-701 Optional Lens User's Manual...
  • Page 5 Specifications (continued) Model FL-701 SL-712 MC-X8170, MC-X8801B,MC-X8801W, MC-WX8265, MC-WU8460, MC-WU8451, MC-WU8461, Supported model MC-WX8651W, MC-WX8751B, MC-WX8751W, MC-WU8601W, MC-WU8701B, MC-WU8701W, MP-WU8701B, MP-WU8701W, MP-WU8801B, MP-WU8801W - / Motorized Zoom / Focus Motorized MC-X8170, MC-X8801B,MC-X8801W +40% - 0% MC-WX8265, MC-WU8460, MC-WU8451, MC-WU8461, +50% - 0% Vertical MC-WX8651W, MC-WX8751B, MC-WX8751W, MC-WU8601W, MC-WU8701B, MC-WU8701W...
  • Page 6 Specifications (continued) Model ML-703 Supported model MC-X8170, MC-WX8265, MC-WU8460, MC-WU8451, MC-WU8461 Zoom / Focus Motorized +50% - 0% MC-X8170 Vertical Lens +55% - 0% MC-WX8265, MC-WU8460, MC-WU8451, MC-WU8461 shift position MC-X8170, MC-WX8265, MC-WU8460, Horizontal +10% - -10% MC-WU8451, MC-WU8461 F-number 1.6 - 2.9 Focal length 24 - 48 mm...
  • Page 7 *1) When SL-712 or ML-713 is used with MC-X8170, MC-WX8265, MC-WU8460, MC-WU8451, MC-WU8461 it will be recoginazed as SL-702 or ML-703, but this is not a malfunction. Please consult your dealer for more information. http://biz.maxell.com/en/display_equipment/ Maxell, Ltd. 5030 Totsuka-cho, Totsuka-ku, Yokohama-shi, Kanagawa 244-0003 Japan http://biz.maxell.com/ja/display_equipment/ マクセル株式会社...
  • Page 8 Lens Installation and Removal Please be careful as the methods for lens installation/removal will differ according to model. ■ Compatible Models For MC-X8170, MC-WX8265, MC-WU8460, MC-WU8451, MC-WU8461 Lens Replacement Procedure 1. Return the lens shift to the center position (1) Press the LENS SHIFT button. The LENS SHIFT dialog will appear. (2) Press the ENTER or INPUT button while the dialog is displayed to execute the CENTERING feature, which adjusts the lens to the center.
  • Page 9 4. Remove the lens Support the lens, and lower the lens lock lever to the lowest position and remove the lens from the projector. You can move the lever while the upper plate touches lower one. Lens lock lever Caution ■...
  • Page 10 Lens Installation Procedure 1. Attach the lens (1) Remove the lens cap. Then turn the product label of the lens upward and install the lens in the projector. Lens cap (rear) Product label Caution ■ Installing the lens in the projector with the lens cap on may lead to malfunction. ■...
  • Page 11 2. Attaching the front cover Insert the front cover into the projector body. Front cover (upper part)
  • Page 12 Lens Installation and Removal ■ Compatible Models For MC-X8801B,MC-X8801W, MC-WX8651W, MC-WX8751B, MC-WX8751W, MC-WU8601W, MC-WU8701B, MC-WU8701W Lens Installation Procedure 1. Pull out the dust protector knobs to remove it. Dust protector Note Keep the dust protector for future use. • 2. Remove the front cover Move and slide the front cover up while pressing the front cover from the underside and remove the front cover from the projector.
  • Page 13 Lens Installation Procedure (continued) 3. Install the lens (1) Remove the lens cap. Then turn the product label of the lens upward and install the lens in the projector. Lens cap (rear) Product label Caution ■ Installing the lens in the projector with the lens cap on may lead to malfunction. ■...
  • Page 14 Lens Installation Procedure (continued) 3. Install the lens (continued) (2) Support the lens, and move the lens lock lever to the upside (until the lens lock lever clicks into the locked position). Lens lock lever Warning ■ To prevent the lens from falling off, after attaching the lens, check that it is securely mounted and that the lens does not move.
  • Page 15 Lens Removal Procedure 1. Return the lens shift to the center position (1) Press the LENS SHIFT button. The LENS SHIFT dialog will appear. (2) Press the ENTER or INPUT button while the dialog is displayed to execute the CENTERING feature, which adjusts the lens to the center. A message dialog is displayed for confirmation.
  • Page 16 Lens Removal Procedure (continued) 4. Remove the lens Support the lens, and lower the lens lock lever to the lowest position and remove the lens from the projector. You can move the lever while the upper plate touches lower one. Insert the dust protector to prevent any substance getting into the lens installation area.
  • Page 17 Lens Installation and Removal ■ Compatible Models For MP-WU8701B, MP-WU8701W, MP-WU8801B, MP-WU8801W Lens Installation Procedure 1. Pull out the Lens hole cover knobs to remove it. Lens hole cover Note Keep the Lens hole cover for future use. • 2. Remove the front cover Slide the front cover (the upper part) upward while pressing the front cover from the underside and remove the front cover from the projector.
  • Page 18 Lens Installation Procedure (continued) 3. Install the lens (1) Remove the lens cap. Then turn the product label of the lens upward and install the lens in the projector. Lens cap (rear) Product label Caution ■ Installing the lens in the projector with the lens cap on may lead to malfunction. ■...
  • Page 19 Lens Installation Procedure (continued) 3. Install the lens (continued) (2) Support the lens, and move the lens lock lever to the upside (until the lens lock lever clicks into the locked position). Lens lock lever Warning ■ To prevent the lens from falling off, after attaching the lens, check that it is securely mounted and that the lens does not move.
  • Page 20 2. Attaching the front cover Insert the front cover into the projector body. Front cover (upper part)
  • Page 21 Lens Replacement Procedure 1. Return the lens shift to the center position (1) Press the LENS SHIFT button. The LENS SHIFT dialog will appear. (2) Select CENTERING on OSD and press the ENTER or ► to execute the CENTERING feature, which adjusts the lens to the center. (3) Pressing the ►button performs CENTERING.
  • Page 22 Lens Removal Procedure (continued) 4. Remove the lens Support the lens, and lower the lens lock lever to the lowest position and remove the lens from the projector. You can move the lever while the upper plate touches lower one. Lens lock lever Note Insert the Lens hole cover to prevent any substance getting into the lens installation area.
  • Page 23 Adjustment of Ultra short throw zoom lens (USL-701) The focus balance from the center to surrounding area varies on the screen size. The Ultra short throw zoom lens has a focus adjustment function to adjust this balance. How to use Focus Adjustment 1.

This manual is also suitable for:

Fl-701Sl-712Ml-703Ml-713Ll-704Ul-705