Bluetooth Mode; Hands-Free Function; Troubleshooting - Gogen DECKO REPRO TRIO User Manual

BLUETOOTH MODE

² Press and hold the 1 button to turn on the speaker.
² The speaker is ready to pair if the LED light flashes blue.
² Activate Bluetooth of mobile phone and search for device name "REPRO VRTULKA" or
"REPRO SPUNTI" then connect it. If the pairing is successful, the LED light will be solid
and you can use the speaker to listen to audio from your mobile phone.
Note: For more information, see your mobile phone's user manual. If you are asked to enter a passcode, enter
0000. After you've paired a mobile phone, the speaker remembers it for the next time.
Disconnecting the paired mobile phone
² Press and hold the 3 button to disconnect your mobile phone from the speaker.
Note: The speaker will auto power off after 10 minutes if there is no operate.
TWS (TRUE WIRELESS STEREO) MODE
² Turn on both speakers. Make sure both speakers are without any Bluetooth connection.
² Press the 3 button on one of the speakers, the second speaker will connect automatically.
The first speaker LED light flashes blue and the LED light of the second speaker one keeps
solid, which means both speakers are connected successfully.
² Pair your mobile phone with the first speaker, the blue LED light of both speakers will be
solid.
² Press and hold the 3 button on one of the speakers to cancel the TWS connection.

HANDS-FREE FUNCTION

When phone or other smartphone is connected to your speaker, follow the steps below to take
calls hands-free.
² Press the 3 button to pick up the call.
² Press and hold the 3 button to reject the call.
² During a call, press the 3 button to hang up the call.
TROUBLE SHOOTING
² The speaker does not turn on.
Charge the speaker. If the speaker does not turn on even after charging, contact customer
service.
EN