Advertisement
Introduction
PR1008-5R is a power supply in a 19" standard 1U rack, which can transform AC120 or 230V to 10 ports of
regulated DC10V 0.5A output. It's a perfect power supply for numbers of cameras, housing, pan tilt turning
devices or other surveillance equipment in a security center...
Features
Built-in NFB to avoid current overload.
Built-in PTC fuse for overcurrent and resettable protection on each port...
.
Panel View
Caution for Operation
1.
The power center has built-in auto reset able fuse on each port. The device will open while it is in
short condition. Please check the system to find out what caused short and solve it. The device
will auto reset after the problem has been solved.
2.
Caution: connect only one device to one port, never connect one device to two different ports, or it
will lose protection. (See below drawing)
1
User Manual
PR1008-5R
Advertisement
Need help?
Do you have a question about the Power Rack Series and is the answer not in the manual?