Advertisement
Quick Links
For up-to-date fitment information, please visit the product page on
3015-42201
AWE 0FG Catback Split Rear Exit Exhaust for 4th Gen Silverado/Sierra 1500 5.3L (With Bumper Cut-
outs) - Quad Chrome Silver Tips
3015-43202
AWE 0FG Catback Split Rear Exit Exhaust for 4th Gen Silverado/Sierra 1500 5.3L (With Bumper Cut-
outs) - Quad Diamond Black Tips
3015-32205
AWE 0FG Catback Split Rear Exit Exhaust for 4th Gen Silverado/Sierra 1500 5.3L (Flat Bumper) -
Chrome Silver Tips
3015-33206
AWE 0FG Catback Split Rear Exit Exhaust for 4th Gen Silverado/Sierra 1500 5.3L (Flat Bumper) - Dia-
mond Black Tips
3015-22207
AWE 0FG Catback Single Side Exhaust for 4th Gen Silverado/Sierra 1500 5.3L (Flat Bumper) - Dual
Chrome Silver Tips
3015-23208
AWE 0FG Catback Single Side Exhaust for 4th Gen Silverado/Sierra 1500 5.3L (Flat Bumper) - Dual
Diamond Black Tips
Welcome to the AWE family, and congratulations on your purchase of the AWE Exhaust System for the 4th Gen Chevy
Silverado 1500 5.3L and GMC Sierra 1500 5.3L.
Exquisite build quality and craftsmanship, coupled with industry leading performance, distinguish this exhaust system
from all others.
*For up to the minute fitment information, be sure to visit the AWE website. As always, AWE Performance Specialists
Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3
REAR END SHOT, STRAIGHT ANGLE
AWE-Tuning.com.
Advertisement
Related Manuals for AWE 3015-42201
Summary of Contents for AWE 3015-42201
- Page 1 *For up to the minute fitment information, be sure to visit the AWE website. As always, AWE Performance Specialists Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 2 4.50” OD x 3.00” ID, Slash Cut, Diamond Black Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3 Copyright 2020, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev1.1...
- Page 3 180003BC 5" x 10", Straight Cut, Diamond Black Tip 180003 5”x10” Straight Cut Chrome Silver Tip Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 4 4.00" OD x 2.50" ID, Slash Cut, Chrome Silver, AWE Logo 180011 4.00" OD x 2.50" ID, Slash Cut, Diamond Black, AWE Tuning Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 5 Figure 1 at (A). Note: This will be reinstalled after you remove the OE exhaust Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 6 Note: After the OE exhaust is completely removed, re-install the OE heat shield, and the spare tire. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 7 Note: After the OE exhaust is completely removed, re-install the OE heat shield, and the spare tire. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 8 (E41), as shown at (A) in Figure 4. Snug the clamp but do not fully tighten it Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 9 Figure 6. Note: Snug the clamp down but do not tighten it fully at this time. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 10 IF INSTALLING THE DUAL EXIT EXHAUST SYSTEM, SKIP TO STEP 14 IF INSTALLING THE QUAD TIP EXHAUST SYSTEM, SKIP TO STEP 21 Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 11 4 tip exhaust systems. You will have 2 sets of hardware left over that will not be used. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 12 Install these clamps on each hanger bar of the AWE overaxle inlet tube (E26), as shown at (A) in Figure 12. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 13 Check the tips for correct alignment, adjust as needed. Don’t forget to look below for any troubleshooting needs! Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 14 Figure 15. Note: Snug the clamp on the joint but do not fully tighten at this time. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 15 It is okay to have the clamp extend • beyond the edge of the tip inlet. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 16 Install these clamps in the orientation for the driver side shown in Figure 19-1,and the passenger side Figure 19-2. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 17 Check the tips for correct alignment, adjust as needed. Don’t forget to look below for any troubleshooting needs! Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 18 Note: Snug the clamp on the joint at this time, but do not fully tighten it. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 19 Note: Do not fully tighten the tip outlet sections, as they may need to be adjusted. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 20 AWE logo is facing up. Using the provided integrated clamp hardware kit snug the tips down but do not fully tighten to allow for final adjustments. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 21 Check the tips for correct alignment, adjust as needed. Don’t forget to look below for any troubleshooting needs! Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
- Page 22 Any questions or comments, CONTACT FORM please do not hesitate to contact us: Up-to-date warranty information is found HERE. Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3...
Need help?
Do you have a question about the 3015-42201 and is the answer not in the manual?
Questions and answers