Jobsite V-12/AW Installation And User Manual page 7

6. Insert the smooth side of the connector plug into
the smooth side of the V-12/AW socket.
7. Install the V-12/AW into the device ring.
8. Set the Impedance Magnification Switch as
determined by the impedance charts.
9. Set the switches, on all of the controls, to the
same position (1x, 2x, 4x, or 8x).
10. Attach the cover plate.
See installation diagram.
INSTALLATION DIAGRAM
Input From
Amplifier
V-12/AW
Side View
Output to
Speakers
Speakers
V-12/AW
Stereo Receiver
5