Switching The Appliance On/Off; Topping Up The Water - Silvercrest SULA 45 A1 Operating Instructions Manual

♦ Unscrew the water tank closure cap
♦ Fill the water tank
(see Fig. 2).
♦ Place the water tank closure cap
closed by turning it clockwise (see Fig 3).
♦ Use a cloth to wipe any remaining water from the appliance.
♦ Use the handle
♦ Insert the tray
♦ Put the lid
♦ Insert the power plug into the mains socket.
Switching the appliance on/off
The appliance has three humidifier settings. The higher the intensity, the greater the
quantity of water that will evaporate. The humidification intensity is shown via the
colour of the MODE / LIGHT
Colour
Red
Green
Yellow
♦ Press the STANDBY button
button
♦ By default, the appliance automatically starts in humidification level "High".
♦ Press the MODE / LIGHT button
tion level.
♦ Press the STANDBY button

Topping up the water

NOTE
► The appliance stops as soon as the water in the water tank
up. The STANDBY button
♦ Switch the appliance off.
♦ Remove the power plug from the mains socket.
♦ Pour water into the water tank
♦ Insert the power plug into the mains socket.
♦ Switch the appliance on.
■ 46 │ GB │ MT
completely with water via the water tank opening
to place the water tank
with the aroma pouch
onto the water tank
Humidification level
High
Medium
Low
lights up red and you will hear a beep.
goes off and you will hear a beep.
in an anticlockwise direction (see Fig. 1).
onto the water tank opening
onto the base unit
.
.
button (see table).
Evaporation quantity
(max. 350 ml per hour +/− 15%)
(max. 180 ml per hour +/− 15%)
(max. 100 ml per hour +/− 15%)
to switch on the appliance. The STANDBY
repeatedly to set the required humidifica-
to switch off the appliance. The STANDBY button
flashes red.
.
and screw it
.
has been used
SULA 45 A1