Summary of Contents for TSI Instruments NETRONIX THIAMIS 8537
Page 1
QUICK START GUIDE INSTALLING THE NETRONIX™ THIAMIS™ GSM/GPS COMMUNICATION MODEM IN THE ENVIRONMENTAL ENCLOSURE MODEL 8537 This guide will help you quickly install the Netronix™ Qty. Item Description Reference Picture Thiamis™ GSM/GPS Communication Modem in the Spare Fuse Environmental Enclosure Model 8537. Unpacking Netronix Thiamis Tools Needed for Installation GSM/GPS Communication...
Page 2
2. Attach power cable as shown (power cable Inline 5. Remove slip nut from GSM-GPS antenna. fuse holder not shown). 6. Attach GSM-GPS Antenna as shown. If you purchased a heat shield skip to step 8. 3. Attach RS232 to USB converter cable to Thiamis unit and route cable behind back plate then install cable guard with thumbscrews.
Page 3
8. Attach GSM-GPS Antenna onto antenna post as 10. Place DustTrak™ aerosol monitor on shelf and use shown. Velcro strap to secure instrument to shelf. Lastly, connect USB to RS232 converter cable to DustTrak monitor. 9. Route GSM and GPS cables behind back panel and connect to Thiamis unit as shown.
Page 4
TSI Incorporated – Visit our website www.tsi.com for more information. Tel: +1 800 874 2811 India Tel: +91 80 67877200 Tel: +44 149 4 459200 China Tel: +86 10 8219 7688 France Tel: +33 4 91 11 87 64 Singapore Tel: +65 6595 6388 Germany Tel: +49 241 523030...
Need help?
Do you have a question about the NETRONIX THIAMIS 8537 and is the answer not in the manual?
Questions and answers