Home Screen - Variations - Janome Quilt Maker 15 Instruction Manual

Home Screen - Variations

Precision Stitch Regulation : Select the Precision icon and then specify the stitches
per inch by pressing the Plus or Minus key on the handlebars. Stitch regulation
maintains a consistent stitch length (stitches-per-inch) regardless of how quickly
or slowly you move the machine. When quilting in Precision mode, the needle only
moves when you move the machine. After you press the Start/Stop key on the
handlebar, move the machine to begin quilting according to the stitches-per-inch
setting. When you pause moving the machine, the needle will pause until you move
again. Press the Start/Stop key on the handlebar to fully stop quilting.
Cruise Stitch Regulation : Select the Cruise icon and then specify the cruise speed
(stitches-per-minute) setting using the Plus or Minus key. Press the Needle
Up/Down key to go to the Cruise Home screen and use the Plus or Minus keys to
set the SPI (stitches-per-inch). When quilting in Cruise mode, the needle will start to
move immediately when you press the Start/Stop key on the handlebar, according
to the cruise speed (stitches-per-minute) setting. Once you begin to move the
machine, the needle will move according to the stitches-per-inch setting. The needle
continues to move at the Cruise speed (stitches-per-minute) anytime you pause the
machine, until you press the Start/Stop key on the handlebar to fully stop
Manual Stitching Mode : Select the Manual icon and then specify the stitches per
minute (speed) by pressing the Plus or Minus key on the handlebars. When using
manual stitching mode, the length of the stitch is determined by how quickly or
slowly you move the machine around the quilt, in combination with the number of
stitches per minute (up to 1800) that you choose. For a consistent stitch length,
move the machine at a consistent speed. Experiment with different combinations
of quilting speed and stitches-per-minute to find what optimally works for you.
 NOTE: Screens are changed by pressing the handlebar control keys. See page 36.
janome.com
Home Screen with Precision Stitch Mode
• Needle-stop Up, 12 SPI (stitches-per-inch) selected.
• SPI can be adjusted on this screen when machine is not running using the
Plus and Minus keys.
Home Screen with Cruise Stitch Mode
• Needle-stop Up, 12 SPI (stitches-per-inch)
• Cruise speed set at 125 SPM (stitches-per-minute) selected.
• SPI can be adjusted on this screen when the machine is not running using
the Plus and Minus keys.
• Cruise SPM is adjusted on the Stitch Mode Cruise menu.
Home Screen with Manual Stitch Mode
• Needle-stop Up, 950 SPM (stitches-per-minute) selected.
• SPM can be adjusted on this screen when the machine is running or not
running using the Plus and Minus keys.
quilting.
Page 35