General Safety Instructions; Intended Use - HBS ONURFIX IT 1002 Operating Manual

1.3 General Safety Instructions
1.4

Intended Use

The power unit is intended to weld welding elements according to actual standards
(see chapter 5 and appendix). Any other use is regarded as not used as directed. The
manufacturer is not liable for damages resulting from the stud welding unit not used
as directed. Any risk is carried by the user.
The power unit is designed according to speci c standards and accident prevention
regulations. Basics are European Union guidelines and in Germany valid standards.
Please note that in your country additional standards and safety conditions (especially
rules for accident prevention) may differ from the standards mentioned in this
operating manual. The power unit was manufactured to the latest developments in
technology and is regarded as safe to operate (place of operation see section 8.1).
The welding guns A 12, A 16, AI 06 and CA 08 can be connected to the HBS power
unit IT 1002. For details please contact the HBS customer service (address see page
ii).
Check in any case the operating manual of the HBS welding gun whether this
power unit can be used.
Observing the operating manual of the used welding gun is also part of the "use as
directed".
12
Improper operation of the power unit is LIFE-THREATENING!
Threat to life
– by electric shock and arc
– by toxic vapors and airborne particles
– by red-hot metal spatters (fire risk)
– by blow-up of explosive gases and materials
– by strong magnetic fields for persons fitted with a pace maker
In addition, through improper use damage to the stud welding unit
and to material can be caused. For details, see chapters 1, 3 and 5.
Warning: Unauthorized interference with the stud welding unit
as well as unauthorized alteration of the stud welding unit are
prohibited and result in complete cancellation of any guarantee
and liability claims against HBS.
Operation of the power unit is only allowed with HBS welding
guns, this clause is also part of "use as directed".
IT 1002 Order No. BA 93-66-1202 Issue 01.06.08