Advertisement
2. INTRODUCTION
Perfect for cleaning all small hard parts. Widely used by jewellers, watch, bicycle,
car and motor cycle repairers, plus precision and model engineers. An ultrasonic
cleaner that achieves great results on delicate items such as watch parts,
PCB boards and electrical components, as well as mechanical items such as
carburettors, spark plugs and injectors. The Degas function purifies the liquid in the
tank to speed up the cleaning process. Using ultrasonic wave vibration, the intense
cleaning action of the microscopic bubbles can penetrate the most inaccessible
parts to remove dirt and grime. Achieve a pristine condition without any damage or
wear to item. Made from durable stainless steel and fitted with a drain tap for easy
emptying and mesh basket to keep smaller components together. Features soft
cleaning mode enabling you to clean your more fragile items.
Recommended for use with Sealey Ultrasonic Cleaning fluids model no. SCT25D or
SCT5D
3. SPECIFICATION
Model No.
Maximum working capacity
Minimum working capacity
Motor power
Overall dimensions (W x D x H)
Supply
Tank dimensions (W x D x H)
4. APPLICATION
‰
WARNING! Provided the product is non-porous and can normally be immersed in water almost anything can be thoroughly
cleaned. Here are some examples:
GOLD-SMITHERY AND SILVER-SMITHERY: Non-porous jewellery, Necklaces, bracelets, rings, precious stones, watch casings
4.1.
and straps, precision mechanical movements.
4.2.
MANUFACTURING: Aerospace, Defence, Automotive, Marine, Filtration, Moulding, Plating & Surface Finishing, Semi-Conductors.
OPTICAL: During edging and polishing, debris and abrasives can scratch lenses. Ultrasonic cleaning can effectively protect the
4.3.
lenses.
4.4.
REGENERATION: For cleaning dot matrix printers and photocopier ink cartridges.
MAINTENANCE: Bicycle gears, air purifiers. It cleans out debris in tiny holes and crevices effectively.
4.5.
5. PREPARATION
5.1.
Carefully unpack the cleaner and remove all traces of packing materials from it. Visually inspect the cleaner for any parts that may
have become loose or damaged during transit.
Place the cleaner on a flat, clean surface where the cooling fans will receive adequate ventilation and ensure all controls are set to
5.2.
off. Also ensure the drain tap is in the closed position.
5.3.
Ensure the power cord is securely plugged into the cleaner and that no part is likely to come into contact with moisture.
Carefully fill 2/3rds of the tank with a solvent solution. For demanding cleaning we recommend a small amount of washing up
5.4.
liquid, this will help increase the cleaning performance. The cleaner is now ready for use.
DO NOT exceed the filling line. Be aware of the displacement volume of the objects being treated to avoid overspill.
WARNING! Items Not Suitable For Ultrasonic Cleaning:
Soft Jewellery: Pearls, emerald, ivory, coral. Agate, sea turtle shells, etc. Welded, Plated and Glued Items: Welded or plated
metal items, glued items. Watches: Except diver's watches with depth rating over 50m(150ft). Others: Ceramic, camera filters with
pre-existing cracks.
© Jack Sealey Limited
SCT03.V2
SCT09.V2
3L
2L
120W
265 x 165 x 225mm
370 x 265 x 280mm
240V
240 x 135 x 100mm
300 x 240 x 150mm
Original Language Version
SCT27.V2
9L
27L
5L
14L
240W
600W
580 x 325 x 335mm
240V
240V
500 x 300 x 200mm
SCT27.V2, SCT09.V2, SCT03.V2 Issue 2 (2) 07/04/22
Advertisement
