Advertisement
Available languages
Available languages
English
Description
This enclosure by Delock enables the installation of an M.2 PCIe NVMe SSD in
2280, 2260 and 2242 format. It connects directly to the PS5 with the two USB
Type-A connectors. The robust metal housing with air vents at the sides ensures
an optimum temperature of the memory.
Additional USB Type-A port
This port is directly forwarded from the PlayStation
on the enclosure can still be used to connect additional USB devices or to charge
the game console's controller.
USB extension cable
The included extension cable can be used to connect the enclosure to a
®
PlayStation
4 and thus copy games to the M.2 SSD to use them on the PS5.
Furthermore, the cable can be used to connect the enclosure to a PC or laptop.
SSD installation without tools
The special feature of this enclosure is that no tools are required to install the
M.2 SSD. The lid can be pushed backwards by a little pressure, the SSD will be
attached to the PCB with a rubber nipple and then the lid is reattached until it
locks.
Specification
• Connectors:
external:
2 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Type-A male
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Type-A female
internal:
1 x 67 pin M.2 key M slot
• Supports M.2 modules in format 2280, 2260 and 2242 with key M or key B+M
based on SATA or PCIe (NVMe)
• Maximum height of the components on the module: 1.5 mm, application of
double-sided assembled modules supported
• Supports NVM Express (NVMe)
®
. Thus, the USB Type-A port
-2-
Advertisement
