Advertisement
Prg
74.6
Set
Prg
74.6
Set
Prg
0
Set
Prg
77
Set
Prg
c0
Set
Press Set to edit, press up and down to edit,
press set to save the setting
Prg
c0
Set
Prg
c18
Set
Please continue to the next page
Default Home Screen
To enter Advanced Programming Mode
Press and Hold
Simultaneously for
5 Seconds
Controller Password
Enter the controller password, which his 77.
Password Entered
Press up until the password 77 is displayed
on the screen, then press set
Variable Configurations
There are many variables that may need to be edited. To reach a variable,
use the up and down buttons to scroll to the desired variable, press set to edit
the variable, and the current value will be displayed. Use the up and down
arrows to edit the value, and press set to save the variables new setting.
c0 Variable – Unit Type
This variable is used to determine the acting method of the controller. c0
should always be set to 1 for PowerAire S units and set to 2 for SmartAire S
units. No other control value is recommended.
c18 Variable - Units
This variable determines whether the temperature display reads in Celsius or
Fahrenheit. A setting of 0 will display Celsius values, a setting of 1 will display
Fahrenheit values.
and
Advertisement
