Beacon Lighting Lucci Connect 299041 Instructions

support@beaconlighting.com.au 03 8561 1599
Lucci Connect Wi-Fi Fan Remote Control
$129.00

DESCRIPTION

Using the Lucci Connect app, this Smart Fan Remote will allow you to control
your fan remotely from almost anywhere. Turn your fan on/off and change the
speed via the remote, from your phone or even voice control from a smart
home hub. Compatible with all our AC fans that require a remote to be
purchased separately
If you need to pair more than one fan to a remote individually, follow these
steps:
Step 1: Turn Both fans off at the wall switch
Step 2: After 10 seconds, switch the first fan on from the wall switch that you
wish to pair with the first remote. The fan should beep 4 times.
Step 3: Once the fan has beeped 4 times, Hold down the power button on the
remote until the fan lights/fan turns on. Once the fan turns on, release the
power button you were holding down and the fan will be paired to that remote.
Step 4: The fan that has just been connected to the remote, switch the fan off
at the wall switch.
Step 5: Switch the second fan on from the wall switch that you wish to pair
with the second remote. The fan should beep 4 times.
Step 6: Once the fan beeps 4 times, hold down the power button on the
remote until the fan light/fan turns on. Once the fan turns, release the power
button on the remote and the second fan will now paired to that remote
Step 7: Turn the first fan back on at the wall switch. It will beep 4 times. Don't
press any buttons on any of the remotes for 2 minutes.
Step 8: After 2 minutes, you should be able to control the fans individually
from each remote.

SPECIFICATIONS

SKU 299041
Brand Lucci Connect
Weight (kg) 0
Product Type Fans
Height (mm) 0
Depth (mm) 0
Globe Included No
Width (mm) 0
Date printed 10 September 2022