Cleaning - ProBreeze PB-MF01 Instruction Manual

TIPS AND TRICKS
• Use your automatic milk frother to
prepare your milk before preparing your
coffee.
• Use whole milk with a fat content above
3% for best results.
• When frothing cold milk, the milk will not
be cooled. It will remain the temperature
it went into the jug at.
• Milk will be heated to approximately 60-
80 °C so it doesn't impact the flavour of
your coffee or make it too hot to drink.
• Keep your whisks in a safe place. They
are small and can be lost easily.
• After frothing or heating milk, wait 2
minutes for the milk frother's thermostat
to reset. To shorten this time, rinse with
water and wipe dry after use.
• Only use the blended hot drinks function
to blend milk and hot chocolate powder
or instant coffee granules. Do not add
chocolate pieces.
• Using the whisks incorrectly or filling the
jug past the correct max line may cause
the milk to overflow.

CLEANING

― ―
WARNING: ALWAYS
TURN THE APPLIANCE
OFF AND UNPLUG THE
POWER CORD FROM THE
ELECTRICAL OUTLET
BEFORE HANDLING OR
CLEANING IT.
CAUTION: DO NOT
ALLOW WATER OR
OTHER LIQUIDS NEAR
THE BOTTOM OF THE
APPLIANCE OR THE
8 of 56 | English
APPLIANCE BASE, AS
THIS COULD CREATE
A FIRE AND/OR
ELECTRICAL HAZARD.
NEVER IMMERSE THE
APPLIANCE IN WATER
AND ALWAYS KEEP THE
ELECTRICAL CONTACTS
DRY.
CAUTION: DO NOT
USE ANY ABRASIVE
CLEANERS OR SOLVENTS,
AS THIS CAN DAMAGE
THE APPLIANCE.
CAUTION: ALLOW
THE APPLIANCE TO
COMPLETELY COOL
DOWN BEFORE
CLEANING.
Do not attempt to clean the
•
appliance in any other way
than that detailed by the
manufacturer.
Clean the exterior surface
•
of the appliance by wiping it
with a soft, damp cloth. Dry
the appliance with a soft,
clean cloth.
Clean the appliance and
•
accessories used after each
use.
Cleaning and user
•
maintenance shall not be
made by children.
To clean the jug, use soapy
•
water and a non-abrasive