Gira 2331 02 Installation And User Manual page 18

2
For wired or radio-networked (if equipped with optional radio
module) smoke alarm devices
The signals generated by the smoke alarm device that triggers the alarm
are as described above. The other smoke alarm devices will also emit
the following signals:
Acoustic signal
Loud intermittent
signal 85 dB(A)
2 short signals
in 60-sec. cycle
1-sec. continuous
alarm signal
73 dB (A) followed
by 2 s pause
The function test is described in more detail in Section 7 of the
"Installation and User Manual - Smoke alarm device Dual/VdS".
18
1 Light ring
1
2 Function button
Light ring
-
-
-
Meaning
Alarm at networked
detectors - smoke or heat
only for wireless network:
Battery change due
(remote signal)
Function test,
(remote signal) triggered
by pressing the function
button for at least 4 s