Insert the pump cap.
4.
Ensure that the parts of the
‒
pump cap are correctly as-
sembled.
Screw the pump cap as far as it
5.
will go.
90°
The handle on the pump cap must
be in a vertical position.
Insert and close the service flap.
6.
2
1
Cleaning and servicing en
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the
after you have emptied the drain
pump.
Turn on the water tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into the
4.
manual dosing compartment.
Select a suitable programme for
5.
draining.
→ "Programmes", Page 25
programme
41