Entering Numbers, Letters, And Symbols - Canon G3620 Online Manual

Entering Numbers, Letters, and Symbols

The buttons on the operation panel allow you to enter (or change) characters, numbers, or symbols when
setting up the network or making other settings.
Switching the Input Mode
The current input mode appears at the upper right corner of the LCD.
Pressing the Setup button on the operation panel toggles through the input modes in the order lowercase
> uppercase > numeric > symbols, showing the first available character.
The following shows available characters in each mode.
Mode
Lowercase
Uppercase
Numeric
Symbols
SP: Indicates a space.
Note
• Only the input modes or characters available for input appear in their respective screens.
Entering Numbers, Letters, and Symbols
Use the button to select a character and press the OK button to input it.
When input of all characters is complete, hold down the OK button. When a confirmation message
appears, select Yes and press the OK button.
• To insert a space
Switch to the lowercase, uppercase, or numeric mode, and then press the
Alternatively switch to the symbol mode and then press the
• To delete the last entered character
Press the Back button. You can only delete the last entered character.
Note
• To terminate character entry, press the Stop button. When a confirmation message appears, select
Yes and press the OK button.
abcdefghijklmnopqrstuvwxyz SP
ABCDEFGHIJKLMNOPQRSTUVWXYZ SP
1234567890 SP
. @ - _ SP # ! " , ; : ^ ` = / | ' ? $ % & + ( ) [ ] { } < > \
Available characters
button four times.
153
~
button once.