Advertisement
Construction
17. Capacitor
C1
: 680nF / 600V
18. IC. Watch the position of
the notch!
IC1 : VK8032
Programmed PIC12C508A
Inspect the complete
assembly once more
before applying power
to the unit !
8
19. Hook - up & use
AC PLUG
Solder an AC cable to the SK1 pins (AC Power).
Solder the cables of each lampholder to the appropriate pins.
As this kit is shipped to different countries, their is no AC plug supplied. You will
need to attach a plug that matches your electrical system.
You can adjust the running speed by turning the trimmer "RV1". Each LED will
light up when a channel is activated.
200W at 110-125VAC
400W at 220-240VAC
MAX ! For each channel.
Advertisement
