Table of Contents
Advertisement
12 Detergents and care
products
The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡ Only use liquid detergents that are
self-flowing
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach)
¡ Use dyes sparingly as salt may
damage stainless steel
¡ Do not use color-bleaching agents
in the appliance
¡ Do not pour vinegar into the dis-
pensers → Page 39 of the intelli-
gent dosing system
operation
13 Basic operation
operation
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
▶
The switch-on process takes a few
seconds.
a An audible function test is carried
out.
Note: The lighting for the drum goes
out automatically.
Detergents and care products en
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 29
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 35
Setting additional programmes
Set the Programas adic. pro-
1.
gramme.
Press
to call up the sub-menu.
2.
Set a programme.
3.
→ "Setting a programme",
Page 35
Press Main menu to call up the
4.
main menu.
If required, adjust the programme
5.
settings.
→ "Adjusting the programme set-
tings", Page 35
Start the programme.
6.
→ "Starting the programme",
Page 36
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 35
Adjust the programme settings.
▶
→ "Buttons", Page 26
Observe the information about op-
erating logic → Page 20.
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
35
Advertisement
Chapters
Table of Contents
