Indiana Furniture 395CGT Assembly Instructions

1
Attach the 2 (two) 2209-00395T – L Bracket
to the side frame of the Gleem+ chair using
4 (four) 2202-01078 - #10 x 7/8 Pan Head
Screws. 2 (two) screws per bracket.
The 2 (two) 2209-00395T – L Bracket
should be placed as shown.
BACK SIDE OF FRONT LEG
INSET 1.25"
Page 1 of 2 Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
395CGT Table Bracket
2
3
4
5
INSET 1.25"
FRONT SIDE OF BACK LEG
Assembly Instructions
Repeat Step 1 for the second Gleem+ chair.
Attach the 395CGT to Gleem+ chair by aligning the
front edge of the table with the back of the front leg.
Attach using 4 (four) 2202-01078 - #10 x 7/8 Pan
Head Screws. 2 (two) screws per bracket.
Repeat step 3 on the second Gleem+ chair.
395CGT is now installed.
800-422-5727
www.IndianaFurniture.com