Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
395GT Table Bracket
2
3
4
5
INSET 1.25"
FRONT SIDE OF BACK LEG
Assembly Instructions
Repeat Step 1 for the second Gleem+ chair.
Attach the 395GT to Gleem+ chair by aligning the
front edge of the table with the back of the front leg.
Page 1
Gleem+ chair using 4 (four) 2202-01078 - #10 x 7/8 Pan Head Attach the 395GT to Gleem+ chair by aligning the Screws. 2 (two) screws per bracket. front edge of the table with the back of the front leg.
Page 2
395GT Table Bracket Assembly Instructions Disassembly Unscrew 8 (eight) 2202-01078 – #10 x 7/8 Unscrew 4 (four) 2202-01078 - #10 x 7/8 Pan Head Pan Head Screw. 2 (two) screws per Screw. 2 (two) screws per bracket. bracket. Remove 2 (two) 2209-00395T – L Bracket.