Page 2
Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of this product.
Page 3
Content and Additional Resources The BC-XP-1 conveniently charges Janam’s standard and double capacity batteries. This guide features basic information about the BC-XP-1 including: For additional product information, please visit www.janam.com. - 2 - Hardware Overview Set Up and Use Safety and Troubleshooting Guidelines...
When charging battery packs that are new or have been on a shelf for an extended period of time, the charger’s status indicator may prematurely show “ready”. » The BC-XP-1 battery charger should be used with Janam batteries (BA-XP-1 or BA-XP-2) only. Power Supply Receptacle Connector...
Page 5
Set-up and Use Janam’s BC-XP-1 is an independent, single bay battery charger or can be used with the UBC 3000*, a universal four-station charging base. To use as a stand-alone charger a. Connect the power supply (PS-XP-BC) at the power supply receptacle on the charger.
Page 6
Installing and Charging a Battery Important Notes: a. Use only Janam batteries (BA-XP-1 or BA-XP-2) b. Do not charge a battery that is below 0°C (32°F). Battery should be at room temperature before charging. Installing a battery a. Note position of connectors and, holding battery with label facing up, place connector-end of battery into battery track on the BC-XP-1.
Page 7
Safety and Troubleshooting Guidelines WARNING To reduce risk of injury, use this charger only with Janam authorized products. Use with other products or accessories may cause personal injury and/or damage. – Do not expose the charger to rain, snow or direct sunlight.
Need help?
Do you have a question about the BC-XP-1 and is the answer not in the manual?
Questions and answers