Warranty Information - Tar River XBC60 Manual

WARRANTY INFORMATION

LIMITED WARRANTY
We warrant each new brush cutter unit to be free from defects in materials
and workmanship for a period of one year from the date of purchase if the unit has
been properly maintained and lubricated as directed according to the operation and
maintenance instructions listed in this manual. We will replace, free of charge,
any component that is defective due to quality of material or workmanship for the period.
ONE-YEAR
NON-COVERED ITEMS
The above limited warranty does not include nor cover blades, blade bolts or hoses.
Wear of these items is a direct result from normal and recommended use.
EXCLUSIONS TO THE LIMITED WARRANTY
Repairs to any component of this machine performed by any firm or individual other
than the original manufacturer will void all warranties. Replacement parts not supplied by the original
manufacturer will void all warranties. Damage due to repairs, accidents, or operator abuse and
neglect, and failure to maintain this machine according to the maintenance and
operation instruction listed in this manual, will void all warranties. Disassembly of the
motor will void motor warranty. Use of a standard flow Brush Cutter on a "high
flow" skid steer loader will cause damage to the cutter's hydraulic motor. Such use
shall void all warranties.
WARRANTY STATEMENT
Our obligation under this Limited Warranty shall be solely limited to repairing or
replacing any part (excluding blades, blade bolts and hoses) free of charge that,
according to our judgment, shows evidence of a defect in quality of material or
workmanship for the stated warranty period. This
ONE-YEAR
Limited Warranty shall not be interpreted to render the manufacturer liable for any injury or
damage to persons, business, or property of any kind nor expenses or losses incurred
for labor, supplies, substitute machinery rental, or for any other reason. Repaired or
replaced parts are subject to the supply conditions at the time of repair or
replacement, which may directly affect our ability to obtain materials and/or
replacement parts. We reserve the right to make improvements in design or
changes in specifications at any time, without incurring any obligations to owners of
previously purchased units.