Letter From Owner - Tar River XBC60 Manual

"THE UNIVERSAL BRUSH CUTTER FOR SKID STEER LOADERS"
Dear Customer,
Thank you and congratulations on the purchase of your new Brush Cutter! We strive to manufacture the best hydraulic
brush cutter for skid steer loaders on the market today. No matter which unit that you purchased, you can rest assured
that it was manufactured to rigid quality standards, utilizing the highest technology in hydraulic system components
that are available. All of our units feature breakaway blades, the ability to cut bi-directional and built-in cushion valves
for smooth shut-down and reduced wear on the hydraulic motor. Our cutters were designed and manufactured to cut
nearly all types of brush, shrubs, and small trees over a wide variety of terrains. When attached to your skid steer
loader, it is highly maneuverable for close cutting in tight areas.
Please take the time to thoroughly read this informative owner's manual. Be sure to pay particularly close attention to
the safety portion of this manual. Remember, the safety guidelines that are mentioned in this manual are not only for
your safety, but also for the safety of others. Only with a complete understanding of your cutter will you be able to
operate it to its full potential.
Thanks again for your purchase. As always, if you have any questions about your Brush Cutter, or would like to give
us feedback, feel free to contact us. We will be happy to help you in any way that we can.
Sincerely,
Tar River Implements