Adjusting The Programme Settings; Loading Laundry; Using A Measuring Aid For Liquid Detergent - Bosch WAX32M40SG User Manual And Installation Instructions

13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 36
Adjust the programme settings.
▶
→ "Programmes", Page 25
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 25.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 33
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Using a measuring aid
for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
1
Insert the measuring aid.
3.
Basic operation en
2
37