Aligning The Appliance - Bosch WAX32M40SG User Manual And Installation Instructions

Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Drainage into a
siphon
Drainage into a
washbasin
Drainage into a
plastic pipe with
rubber sleeve or
into a gully.
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
using an elbow.
Fix and secure
the water outlet
using an elbow.
Installation and connection en
4.7 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.
To align the appliance, turn the ap-
2.
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.
17