What Your New Headset Can Do; Getting Started; Charge Your Jabra Bt325S; Turn On Your Jabra Bt325S - Jabra BT325S User Manual

What your new headset can do

The Jabra BT325s lets you listen to your favorite stand-alone music player, while
ensuring that you never miss a call from your Bluetooth enabled mobile phone .
Your Jabra BT325s lets you do all this, when acting as a Bluetooth headset:
• Pair with up to 8 devices
• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Mute
• Last number redialing*
• Call waiting*
• Place call on hold*
* Phone dependent
Specifications:
• Talk time up to 8 hours/standby time up to 240 hours
• Rechargeable battery with charging option from AC power supply
• Weighs less than  . 4 oz (40 g) incl . the original Jabra headphones
• Operating range up to 33 feet (approx . 0 meters)
• Handsfree (default) and Headset Bluetooth profiles*
• Bluetooth* specification  . 2
•
Ingress Progress Rating IP22* (The Jabra BT325s can withstand a short rain shower)
* See glossary
Please note that your Jabra BT325s can withstand a short rain shower but is not
waterproof and cannot be submerged. If your device gets wet, it should be wiped
clean of any traces of water in order to protect it from potential damage.

GETTING STARTED

The Jabra BT325s is easy to operate . All buttons are dedicated to control your mobile phone
calls, and the buttons performs different function depending on how long you press them:
Instruction: Duration of press:
Tap Press briefly and let go
Press Approx:  second
Press and hold Approx: 5 seconds
4
1

Charge your Jabra BT325s

Fully charge your Jabra BT325s for two hours before you start using it . Use only the
chargers provided in the box – do not use chargers from any other devices as this might
damage your Jabra BT325s .
Connect the Jabra BT325s as shown in fig. 2 to the AC power supply to charge from a
power socket . When the indicator lights are solid red, your headset is charging . When
the lights turn to green, the headset is fully charged .
2

Turn on your Jabra BT325s

• Press the answer/end button to turn on the Jabra BT325s - when the device is on the
LED indicator light will flash four times .
• Press and hold the answer/end button to turn the device off
Note that the Jabra BT325s can still play music from the stand-alone music player
even though the Jabra BT325s is turned off.
3

Pairing with a mobile phone

Before using the Jabra BT325s with a mobile phone, you must first pair it.
1. Put the Jabra BT325s into pairing mode:
• Make sure the headset is turned off .
• Press and hold the answer/end button until the indicator light is solid blue .
2. Set your mobile phone to 'discover' the Jabra BT325s
Follow your phone's instruction guide . This usually involves going to a 'set up'
'connect' or 'Bluetooth' menu on your phone and selecting the option to discover or
add a Bluetooth device . (See example from typical mobile phone in fig. 4)
3. Your phone will find the Jabra BT325s
Your phone will ask if you want to pair with it, accept this with 'yes' or 'ok' and confirm
with the passkey or PIN=0000 (4 zero's)
Your phone will confirm when pairing is complete . In case of unsuccessful pairing repeat
steps  to 3 .
5