Denon AVR-S660 Owner's Manual page 127

Contents Connections
o Low Frequency
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default: 0 dB)
0 This can be set when the LFE signal is included in the input signal.
0 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is
played.
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources: 0 dB
0 DTS movie sources: 0 dB
0 DTS music sources: -10 dB
Front panel Display
Playback Settings
o Center Image
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0.0 – 1.0 (Default : 0.3)
0 You can set this when the sound mode is DTS Neo:6 in the "Music" mode.
0 The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
o Panorama
The front sound field is expanded further towards the back to create a
seamlessly inclusive sound impression.
On:
Off
(Default):
0 You can set this when the sound mode is Dolby PLg in the "Music" mode.
127
Rear panel
Tips
Use "Panorama".
Do not use "Panorama".
Remote Index
Appendix