Headset General Specifications; Speaker Section; Microphone Section; Headset Operation Instructions - NexxTech 2516525 User Manual

Headset General Specifications

Speaker Section

Speaker
Impedance
Sensitivity
Frequency Response
Max. Power Input
Connector

Microphone Section

Microphone
Polar Pattern
Sensitivity
Frequency
Cord Length
Cord:

Headset Operation Instructions

1. Insert the two plugs to a computer sound card at rear to the
corresponding symbol. Normally, pink for microphone, green for
speaker.
2. Adjust headset to fit left or right and clip on to ear.
3. Adjust the microphone close to your mouth, then start using.

Snapshot Function

Function 1: Press the snapshot button directly to active AMCAP-
> press snapshot button to capture still image -> file -> "save as"
image.
Function 2: Active VideoImpression-> click "create a new slide
show"-> click "scan image" -> select device and click "OK" -> click
"snapshot ".
15mm Dynamic Type
32 Ohms(Ω) 15%
112 ± 3dB
100 ~ 10kHz
15mW (0.7V)
3.5mm stereo plug
Condenser Type
Omni-directional
-42dB ± 3dB
50 ~ 16kHz
6 feet (1.8m)
6 feet (1.8m) with two 3.5mm plugs
11