Table of Contents
Advertisement
Microwave light (interior)
1 Disconnect power to your microwave at the circuit breaker or by unplugging it.
2 Remove the vent grille mounting screws from the top center of the vent grille, then push down on the tabs at
each end of the vent grille to disengage it.
Vent grille mounting screws
3 Pull the vent grille away from the unit.
Vent grille
4 Remove the charcoal filter.
Charcoal filter
5 Open the light cover by removing the light cover screw, then carefully pull up on the front edge.
Light cover
Light cover screw
6 Remove the old light bulb, then replace with a new bulb.
7 Replace the microwave light cover by carefully pushing it into place, then replace the mounting screws.
16
Advertisement
Table of Contents
