Related Manuals for McConnel V3 Proportional
Summary of Contents for McConnel V3 Proportional
- Page 1 Publication 647 V3 Proportional March 2010 Part No. 22674.47 Armrest Controls USE THIS MANUAL IN CONJUNCTION WITH MACHINE’S SPECIFIC OPERATOR MANUAL Operator Manual...
- Page 2 For Safety and Performance … ALWAYS READ THIS BOOK FIRST McCON NEL LIMITED Temeside Works Ludlow Shropshire England Telephone: 01584 873131 www.mcconnel.com...
-
Page 3: Safety Section
SAFETY SECTION This machine has the potential to be extremely dangerous - in the wrong hands it can kill or maim; It is therefore imperative that both owner and operator of the machine reads and understands the following section to ensure they are fully aware of the dangers that do, or may exist, and their responsibilities surrounding the use and operation of the machine. - Page 4 BEFORE USING THIS MACHINE YOU MUST: ▲ Ensure you read all sections of the operator handbook. ▲ Ensure the operator is, or has been, properly trained to use the machine. ▲ Ensure the operator has been issued with and reads the operator handbook. ▲...
- Page 5 ▲ Always disengage the machine, kill the tractor engine, remove and pocket the key before dismounting for any reason. ▲ Always clear up all debris left at the work area, it may cause hazard to others. ▲ Always ensure when you remove your machine from the tractor that it is left in a safe and stable position using the stands and props provided and secured if necessary.
-
Page 6: Additional Safety Advice
No advice given here can replace ‘good common sense’ and ‘total awareness’ at all times, but will go a long way towards the safe use of your McConnel machine. - Page 7 PROPORTIONAL ARMREST CONTROLS - v.3 Right Hand Right Hand Left Hand Left Hand...
- Page 8 ARMHEAD FUNCTIONS – Electric Proportional Control Machines...
-
Page 9: Switch Locations
SWITCH LOCATIONS - v.3 Proportional Armrest Controls SWITCH FUNCTION L.E.D. Power ON/OFF - Turn clockwise for ON, Push for OFF Auto Reset Lift Float Head Angle Float Rotor Off Rotor On - Upward Cutting Rotor On - Downward Cutting Tele/Slew Swap - determines operating mode of: I & J Slew Operation - H deactivated h OFF Tele Operation - H deactivated... -
Page 10: Switch Functions
SWITCH FUNCTIONS - v.3 Proportional Armrest Controls All auxiliary switch controls are accompanied by an L.E.D. light, these indicate to the operator that a function is selected and working correctly. SWITCH FUNCTION/OPERATION SWITCH ‘A’ POWER ON/OFF Turn clockwise for ‘ON’ and push down for ‘OFF’ SWITCH ‘B’... - Page 11 SCREEN DISPLAY AND FUNCTIONS Twist E/stop on armrest controls to power on and the screen will light up. Note: 12Volts at the battery are required for correct function. The screen will initially display the McConnel logo, software version and the PTO maximum speed.
- Page 12 McConnel Limited, Temeside Works, Ludlow, Shropshire SY8 1JL. England. Telephone: 01584 873131. Facsimile: 01584 876463. www.mcconnel.com...