Advertisement
11.3.4
Save the current setting of keys tuned to Raaga
Memory (RMEM) using the SAVE option. Select any
memory from RMEM-0 to RMEM-9 using knob.
Press OK button. Name it using the alphanumeric
keypad. Buttons ˃ and ˂ are used for navigation
during naming. Press OK button to save the name in
Raaga Memory.
TUNE
>SAVE
RMEM-0:Puriya--------
RMEM-1:-----------------
11.3.5
Recall any stored raaga from RMEM-0 to
RMEM-9 by using RECALL option. When RECALL
is selected, the LCD displays the list of stored
raagas with their names. Select the raaga by using
the knob and press OK button. Note that the key-
tuned raaga would be recalled with the presently set
pitch and SA key.
11.3.6
Note: If the instrument is set to Chromatic
scale, pressing KEY TUNE button will automatically
change Scale to Indian Scale and key tuning can be
performed in Indian scale.
SAVE
>RECALL
12.
Battery Charge:
The instrument is provided with 3 internal Li-ion
rechargeable batteries which get charged whenever the
AC Mains power is connected. BAT button is provided to
check the charge status of the batteries.
12.1 Press BAT button. Display shows BATT and RESET with
BATT selected
12.2 Press OK button.
12.3 LCD will show "charge: xx%" if AC is not plugged in or
"charging: xx%" if AC is plugged in.
>BATT
RESET
13.
Reset:
If for any reason the user wishes to restore all the settings to
the Factory Default values, the RESET button can be used.
13.1 Press BAT button.
13.2 Within 4 sec, turn the knob to select RESET.
13.3 Press OK button. It will reset the Maadhurium to factory
settings.
Caution: This action will erase all the memory data (User
memory & Raaga memory) stored along with names. The
User setting will change to factory default : SA : W1, Pitch :
C, Volume : 15, Voice : 1, Gamak range : 4, Tone : 01, Fine
Pitch : 00, Scale : Ind
Advertisement
