Automatic Lighting Systems - General; Recommendations; Automatic Headlamp Dipping - CITROEN BERLINGO Handbook

Hide thumbs Also See for BERLINGO:
Table of Contents

Advertisement

Lighting and visibility
You can activate/deactivate this
function and adjust the guide-me-
home lighting duration in the Driving/Vehicle
touch screen menu.
Manual
► With the ignition off, pull the lighting control
stalk toward you ("headlamp flash") to activate/
deactivate the function.
Manual guide-me-home lighting goes off
automatically after a period of time.
Welcome lighting
With the "Automatic headlamp illumination"
function activated, in poor light, the sidelamps
and dipped beam headlamps come on
automatically when the vehicle is unlocked.
Activation, deactivation and the
duration of the exterior welcome
lighting are set in the Driving/Vehicle touch
screen menu.
86
Automatic lighting
systems - General

recommendations

The automatic lighting systems use a detection
camera, located at the top of the windscreen.
Operating limits
The system may be disrupted or not work
correctly:
– When visibility conditions are poor
(e.g. snowfall, heavy rain).
– If the windscreen is dirty, misted-up or
masked (e.g. sticker) in front of the camera.
– If the vehicle is facing highly reflective signs
or safety barrier reflectors.
www.carobook.com
The system is not able to detect:
– Road users that do not have their own
lighting, such as pedestrians.
– Vehicles with hidden lighting (e.g. travelling
behind a safety barrier on the motorway).
– Vehicles at the top or bottom of a steep
slope, on winding roads, on crossroads.
Maintenance
Clean the windscreen regularly,
particularly the area in front of the camera.
The internal surface of the windscreen can
also become misted around the camera.
In humid and cold weather, demist the
windscreen regularly.
Do not allow snow to accumulate on the
bonnet or roof of the vehicle as this could
obstruct the camera.
Automatic headlamp
dipping
For more information, refer to the
General recommendations for
automatic lighting systems.
With the ring of the lighting control stalk in the
"AUTO" position and the function activated on
the touch screen, this system automatically
switches between dipped and main beam
headlamps, according to lighting and traffic
conditions, using a camera located at the top of
the windscreen.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents