CITROEN BERLINGO Handbook page 61

► Lift the bar 2, located behind the seat, to
release the feet of the seat from their anchorage
in the floor.
► Tilt the entire seat forwards.
► Hook the strap 3 on the row 2 head restraint
rod.
Returning the seat to the sitting position
► Fold the entire seat backwards.
► Check that the seat belt is not trapped during
the manoeuvre.
Removing the seat
► Lower the head restraint as far as it will go.
► Place the seat in the fully folded position.
► Pull on the strap 3 to open the seat
anchorages.
► While still holding the strap 3, lift the seat.
www.carobook.com
Refitting the seat
► Pull on the strap 3 to open the seat
anchorages.
► While still holding the strap 3, place them in
the anchorage points on the floor.
► Release the strap 3.
► Ensure that no object or feet are obstructing
the rear anchorage points 4 and that the seat
belt is correctly positioned and available.
► Fold the seat backwards to fix its rear
anchorage feet.
► Use the control 1 to lift the backrest to its
original position.
► Raise the head restraint.
Ease of use and comfort
Head restraint height
adjustment
► To raise it, pull it upwards as far as possible
(notch).
► To remove it, press the lug A and pull it
upwards.
► To put it back in place, engage the head
restraint rods in the openings keeping them in
line with the seat backrest.
► To lower it, press the lug A and push down on
the head restraint at the same time.
The head restraint has a frame with
notches which prevents it from lowering;
this is a safety device in case of impact.
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.
Never drive with the head restraints removed;
they must be fitted and correctly adjusted.
3
59