Advertisement
RET1028
Retina Weather Proof Color Camera
with SONY High Resolution CCD Sensor & On-Screen Adjustability
SPECIFICATIONS
Model
Pick Up Element
Effective Picture Elements (H X V)
NTSC: 1020(H) X 508(V) PAL: 1020(H) X 596(V)
Horizontial Resolution
Minimum Illumination
S/N Ratio
Scanning System
Synchronous System
Auto Electronic Shutter
NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
Gama Characteristic
IR Distance
Video Output
Auto Gain Control
Power/Current
Lens
Dimension (mm)
Weight (g)
Storage Temperature
Operating Temperature
ON-SCREEN SETTINGS
LENS
AUTO
HIGH LUMINANCE MODE: SHUT+AUTO IRIS/AUTO IRIS
AUTO
SHUTTER/AGC
MANUAL
SHUTTER: 1/50,1/120,1/250,1/500,1/1000,1/2000,1/4000,1/10000
ATW
SPEED/DELAY CNT/ATW FRAME/ENVIRONMENT
WHITE BAL
PUSH/ANTI CR/PUSH LOCK/USER1/USER2/MANUAL
BACK LIGHT
PICT ADJUST
MIRROR/BRIGHTNESS/CONTRAST/SHARPNESS/HUE/GAIN
OFF
ATR
ON
OFF
MOTION DET
ON
DETECT SENSE/BLOCK DISP/MONITOR AREA/AREA SEL/TOP/BOTTOM/LEFT/RIGHT
OFF
PRIVACY
ON
AREA SEL/TOP/BOTTOM/LEFT/RIGHT/COLOR/TRANSP/MOSAIC
COLOR
B/W
DAY/NIGHT
AUTO
NR
NR
CAMERA ID
OFF/ON
SYNC
INT
LANGUAGE
ENGLISH/CHINESS/JAPANESS/ESPANOL/PORTUGUES/PYCCKNN/FRANCAIS/DEUISCH
USER MANUAL
RET1028
1/3" SONY EXview HAD CCD I
700 TV Lines
0.001 Lux 0 Lux ( with IR LED ON)
52db
2.1 Interface
Internal, Negative sync.
0.45
25 Meters (with 5x30 PCS infrared LED)
1Vpp, 75Ω
Auto
DC12/350 mA
3.6mm Board lens
200(W) x 78 (H) x 65 (D)
700
-30~+60°C RH 95% MAX
-10~+45°C RH 95% MAX
MANUAL
DC/VIDEO
MODE: CLOSE/AUTO/OPEN SPEED: 0-255
BRIGHTNESS: 0-255
LOW LUMINANCE MODE: OFF/AGC
BRIGHTNESS: x0.25, x0.5, x0.75, x1
MODE: SHUT+AGC
AGC: 6,12,18,24,30,36,42,44.8
OFF/BLC/HLC
LUMINANCE/CONTRAST
BURST: OFF/ON
BURST: OFF/ON
DELAY CNT/DAY-NIGHT/NIGHT-DAY
MODE: Y/C,OFF, Y ,C
CAMERA RESET/BACK/EXIT/SAVE ALL
TROUBLESHOOTING
1.
No picture after providing power.
Possible power supply voltage abnormality. Check for proper power supply voltage and
polarity. Ensure that all the connecting cables and monitors are hooked up properly.
2.
Interference (hum bars) are moving through the picture.
Check the monitor and peripheral equipment used.
3.
The picture background changes color continuously.
The fluorescent light's electromagnetic field can cause color roll. This is a normal
phenomenon. Reduce the number of fluorescent lights, or increase the distance
between the camera and the fluorescent lights.
4.
The picture quality is poor or "fuzzy"
This is usually due to poor quality cables or poor connections. Ensure that all the
connecting cables and monitors are hooked up properly, or switch to higher quality
connecting cables.
LIMITED WARRANTY
This warranty remains in effect for one year from the date of purchase. Except as specified be-
low, this warranty covers all defects in material and workmanship. The following are not covered:
Damaged caused by accident, misuse, abuse, product modification or neglect, damage occurring
during shipment, damage from failure to follow instructions contained in the owner's instruction
booklet, damage resulting from the performance of repairs by someone not authorized by Retina
Security Equipment, or any claims based on misrepresentations by the seller. This warranty does
not cover incidental or consequential damages. It does not cover the cost of removing or reinstall-
ing the unit. This warranty is void if the serial number has been removed or defaced.
This warranty gives you specific legal rights. You may also have other rights which vary from
state to state. Some states do not allow the exclusion or limitations of incidental or consequential
damages or limitation on how long an implied warranty lasts so the above may not apply to you.
HOW TO OBTAIN SERVICE
Please call us at (800) 844-9555 Monday – Friday 8am – 5pm. Central Standard Time.
We may direct you to an authorized dealer/technician or request that you return the prod-
uct for repair. You must present the original bill of sale to establish the date of purchase.
Please do not ship your product to us for repair without prior authorization. You are
responsible for transportation of your product and payment of any shipping charges. If
the repairs are covered under warranty, we will pay the return shipping charges.
NOTE: Do not attempt to disassemble the camera. Doing so may void your warranty.
No user-serviceable parts inside.
Advertisement
